What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 09:33
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Here is a simplified AC power diagram.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
For this case there are devices called Metal oxide varistors (MOV).
He then asserts :
but this device (an Inductor) … impedes the rapid changes in the current.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
(Dc diagram shown, AC is similar).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
"Oh, Mary!" star Cole Escola manifested their Tony win the old-fashioned way - Salon.com
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]
I'm British and feel ashamed of the crimes of British colonialism. What should I do?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At least they know the answer if they wanted it.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then describes Rainy Season and Lightning.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Satellite Images Suggest US Avoided Iran’s Nuclear Reactors - Bloomberg.com
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The #1 Dessert to Help Lower Dementia Risk, According to Dietitians - EatingWell
This is where the MOV conducts again, and dissipated the energy.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This one hit behind the barn.
But it can get overloaded, and no longer works.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
[old diagram got deleted by accident]
UN calls for investigation into killings near Gaza aid site - BBC
So, the voltage could go up to 500 volts, and the fuse will not open up.
At one ohm, the resistor has a maximum of 1 watt power.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Amazon joins the big nuclear party, buying 1.92 GW for AWS - TechCrunch
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
A circuit breaker is similar, but is resettable.
2024–10–10[John johnson John Johnson ]
The bolt then partially travels down the line to your home.
but I think this circuit , shows a few more pieces.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Winners, losers from NASCAR Cup race at Nashville won by Ryan Blaney - NBC Sports
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One is “what exactly is in a ‘surge protector’ ? ”
This couple paid $19M for 2 Jersey Shore houses. Then they demolished them. - NJ.com
It also is a device that limits the change in current flow.
nine
Edit 2024–10.
All returning athletes in Tony Hawk's Pro Skater 3 + 4 revealed - ESPN
First Sentence:
Barnstars:
These devices are installed between the “hot” and “neutral” and protective ground.
RPI researchers delighted when underwater volcano opened up beneath them - Times Union
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
An AC voltage/ current source, and an ac inductive load.
But… the neutral is now “floating” because of the 1 ohm resistance.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
A fuse is a non-resetable over current circuit protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
what exactly is a ‘surge’ protector?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There are two important concepts here.
Upvotes:
He then describes the function of a fuse.
the problem then depends on "how fast does the fuse operate?".
a photo is worth a thousand words.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This device then solves the entire problem.
These are simplified answers to the original question, and does not change anything I wrote above.
[image of Common-mode choke]
so, what happens?
eight
It seems Mohan does not understand the difference between a comment and an Answer.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What does a fuse do?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Now when you have a certain ac resistance, then a current flows in a loop.
In schematic diagrams this is the symbol for a fuse:
Because the load is inductive, the current lags the voltage.(by a bit).
The third is lightning and “how it gets conducted into a home.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
I post the exact comment here.
There are three different concepts here that are getting confused.
One
The other is “what does a “fuse” do?”
What is lightning?